VIP 916 is a diamond wire cutting machine on track that allows, with only one positioning, the execution of two cuts parallel to the distance of 1.75 or 2 meters. The double-inverter version, one for the main motor and one for the travel movement on the rails, is equipped with PLC.
This version comes with a portable control panel either electromechanical or touch-screen. The version with touch-screen and related software allows to interface with the operator, with automatic storage and processing of all the data related to cuts, which are essential for an accurate management of the cutting operation.
A remote panel without cable, controlling all the positioning and operational functions of the machine, can be supplied as an option.
 |
Main electric motor power |
37kW-45kW-55kW |
 |
Starter |
Star delta |
 |
Wire tension |
Automatic controlled by supercard |
 |
Diameter drive wheel |
mm 800 – 1000 mm |
 |
Lateral movement of cutting head |
1,75 or 2,00 m |
|
Flywheel rotation |
360° |
 |
Linear wire speed |
40 m /sec |
 |
Length of rails |
2-3 m |
 |
Machine size |
L=2,25; W=1,45; H=1,40m |
|
Main electric motor power |
37kW-45kW-55kW |
|
Starter |
Star delta |
|
Wire tension |
Automatic controlled by supercard |
|
Diameter drive wheel |
mm 800 – 1000 mm |
|
Lateral movement of cutting head |
1,75 or 2,00 m |
|
Flywheel rotation |
360° |
|
Linear wire speed |
40 m /sec |
|
Length of rails |
2-3 m |
|
Machine size |
L=2,25; W=1,45; H=1,40m |
Via Provinciale Nazzano, 20
54033 Carrara (MS) ITALIA
